THIS IS A SET OF DIY FABRICATION ROOF RACK MOUNTS . THESE ARE MADE TO CLAMP TO THE GUTTER SO YOU CAN WELD YOUR ROOF RACK TO THEM. THESE ARE FLAT AND WILL SIT STRAIT TO FIT A FULL WIDTH ROOF RACK. THESE ARE 6 INCHES TALL, 3 1/2 INCHES WIDE AT THE TOP AND 1 1/2 INCHES WIDE AT THE BOTTOM/ THESE ARE CNC CUT FROM 1.8 INCH STEEL PLATE. THEY WILL COME WITH A 3/4 INCH BOLT AND NYLON LOCKING NUT TO HOLD THEM TIGHT TO YOUR GUTTERS. THIS IS A SET OF 8. WELDING AND MOUNTING RESPONSIBILITY OF BUYER, FOR OFFROAD PURPOSES ONLY FREE SHIPPING TO US CUSTOMERS  

THIS POST IS FOR A GRILLE PLATE FOR THE 1997 - 2001 JEEP CHEROKEE XJ. THESE ARE CNC CUT FROM 14GA COLD ROLLED AMERICAN STEEL. THESE BOLT OVER YOUR STOCK GRILL TO GIVE YOU A NICE CUSTOM LOOK.. ( HARDWARE NOT INCLUDED )   YOU WILL RECEIVE: 1 GRILLE PLATE 1 DIRTDOGS OFFROAD VINYL STICKER  

THIS POST IS FOR A SWITCH PLATE FOR A 97 TO 01 JEEP CHEROKEE. THIS REPLACES THE ASH TRAY IN THE CENTER CONSOLE. THIS IS A BLANK PLATE FOR THE DIY PEOPLE THAT WANT TO PUT THEIR OWN SWITCHES IN IT THE WAY THEY WANT.  THIS IS FOR THE PLATE ONLY. THERE IS NO SWITCHES INCLUDED. PLEASE SEE PICTURES FOR DETAILS. THESE ARE SHIPPED RAW METAL. AS SEEN IN THE PICTURES. DDOPART# XJSP1 SHIPPING PRICE IS FOR THE UNITED STATES.  

THIS POST IS FOR A SET OF JACK MOUNTS MADE TO MOUNT THE HARBOR FREIGHT STYLE FARM JACK. THESE ARE MADE FOR JACKS THAT HAVE A 1/4 INCH GAP BETWEEN THE HANDLE AND THE RAIL. THESE WILL NOT FIT THE HIGH LIFT BRAND JACK. THESE ARE MADE TO MOUNT TO ANY FLAT SURFACE. THESE ARE MADE TO HOLD THE JACK TO KEEP IT FROM SLIDING BACK AND FORTH. THEY ALSO HAVE A HOLE TO LOCK THEM TO KEEP YOUR JACK SECURE. THE BOLTS TO OPEN THESE ARE A SIMPLE BOLT AND WINGNUT TO GET TO YOUR JACK QUICKLY. HARDWARE SHOWN HERE WILL BE INCLUDED. THESE ARE CNC CUT FROM 1/8 INCH STEEL AND FORMED ON A BENDING BRAKE FOR A CLEAN BEND AND A SOLID PART. THESE WILL SHIP RAW STEEL. PAINTING AND MOUNTING ARE RESPONSIBILITY OF THE BUYER. NO LOCK OR JACK ARE INCLUDED THIS IS JUST THE BRACKETS WITH HARDWARE. FREE SHIPPING TO US CUSTOMERS

THIS POST IS FOR A REAR TIRE CARRIER DELETE PLATE FOR THE 02 TO 07 JEEP LIBERTY KJ. THIS USES THE FACTORY HARDWARE TO BOLT UP. THIS WILL SHIP RAW METAL. THESE ARE CNC CUT FROM 14GA STEEL. THIS WILL DRESS UP THAT BLANK SPOT WHERE YOUR TIRE CARRIER SAT. FREE SHIPPING IN THE UNITED STATES

A COOL LITTLE DRESS UP PART FOR YOUR R51 PATHFINDER. THESE FIT THE 05 TO 07 BODY STYLE. THESE HAVE 4 BOLT HOLES DRILLED IN THEM FOR MOUNTING THEM. THE 14 GA STEEL WILL EASILY CONTOUR TO YOUR BODY WITHOUT BENDING ANYTHING OUTTA WACK. THESE ARE CUT FROM 14GA STEEL AND WILL BE SHIPPED RAW METAL.   PLEASE CHECK US OUT ON INSTAGRAM AND FACEBOOK. THANK YOU FOR LOOKING AND HAPPY OFF-ROADING    

THIS POSTING IS FOR A CARGO PLATE FOR THE 1984 TO 2001 JEEP CHEROKEE XJ BODY STYLE. THIS PLATE TAKES THAT LITTLE POCKET CUT OUT IN THE BACK PASSENGER SIDE AND MAKES IT A USEFUL STORAGE SPOT TO CARRY STRAPS,OIL, PAINT OR OTHER STUFF YOU MIGHT WANT TO TOSS IN THERE TO KEEP OUT OF THE WAY. THESE ARE CUT FROM 14GA STEEL AND WILL BE SHIPPED RAW METAL. THESE WILL INCLUDE THE SELF TAPPING SCREWS YOU CAN USE TO SCREW IT ONTO THE INTERIOR PLASTIC. PLEASE SEE MY YOUTUBE CHANNEL DIRTDOGS OFFROAD FOR AN INSTALL VIDEO OF THIS PART AND OTHERS. THANK YOU. I HAVE LOT OF OTHER PARTS FOR JEEPS. I MAINLY WORK WITH THE XJ BODY STYLE FOR NOW. PLEASE FEEL FREE TO BROWSE THROUGH MY STORE AN SEE IF THERE IS ANYTHING YOU MAY BE ABLE TO USE. THANKS FOR LOOKING AND HAPPY OFFROADING. SHIPPING PRICE IS FOR THE UNITED STATES. ----------------------------------------------------------------------------------------------------- PARTS FOR OFF-ROAD PURPOSES ONLY. MOUNTING IS THE RESPONSIBILITY OF BUYER. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

THIS POSTING IS FOR A SET OF JEEP PUNISHER HOOD VENTS. THESE ARE CNC CUT OUT OF 14GA STEEL SO THEY ARE STRONG BUT STILL HAVE A LITTLE FLEX TO FIT YOUR HOOD PROPERLY. I MADE THE WIRE MESH SO YOU CAN BOLT IT IN WITH THE VENTS. OR IF YOU CHOOSE YOU CAN TAC WELD IT INTO PLACE.THE MESH WILL KEEP STUFF FROM FALLING INTO THE SPACES BETWEEN YOUR DESIGN. DDOPART# DDOHV1 FREE SHIPPING TO US CUTOMERS

THIS POST IS FOR A REAR LICENSE PLATE BRACKET LED LIGHT MOUNT. THIS WILL BRIGHTEN UP THE REVERSE OF YOUR JEEP PRETTY NICE WHEN YOU ARE OFFROAD OR JUST TRYING TO BACK UP. THIS HOLDS 2 LED PODS I DO MAKE AN OPTIONAL ANTENNA MOUNT FOR THESE THAT IS ALSO AVAILABLE. DUE TO THE POPULARITY OF GUYS RUNNING RACE RADIOS IN THEIR RIGS NOW A LOT OF PEOPLE ASK FOR THEM WITH NO ANTENNA MOUNT. THESE MOUNT WITH 4 HOLES 2 BEHIND THE PLATE AND 2 BEHIND THE LIGHTS. THESE ARE FAIRLY LIGHT WEIGHT EVEN WITH THE LIGHTS, BUT LETS FACE IT. THE JEEP PLASTIC LICENSE PLATE PLASTIC CLIPS ARE NOT VERY GOOD AFTER A FEW YEARS. THERE IS ALSO 2 HOLES BEHIND THE LIGHTS TO RUN YOUR LIGHT WIRING STRAIT THROUGH THE BACK THROUGH THE GATE OR YOU CAN SPACE THIS WITH A COUPLE WASHERS AND RUN THE WIRING THROUGH THE LICENSE PLATE LIGHT. THESE ARE CUT FROM 14GA STEEL AND WILL BE SHIPPED RAW METAL. THIS IS FOR THE BRACKET ONLY. THESE ARE NOT PAINTED AND THERE IS NO LIGHTS OR HARDWARE INCLUDED.   FREE SHIPPING IN THE US

THIS POSTING IS FOR A SET OF UNIVERSAL HOOD VENTS. THESE ARE CNC CUT OUT OF 14GA STEEL SO THEY ARE STRONG BUT STILL HAVE A LITTLE FLEX TO FIT YOUR HOOD PROPERLY. I MADE THE MESH INSERTS SO YOU CAN BOLT IT IN WITH THE VENTS. OR IF YOU CHOOSE YOU CAN TAC WELD IT INTO PLACE.THE MESH WILL KEEP STUFF FROM FALLING INTO THE SPACES BETWEEN THE SPACES IN THE VENTS. THESE ARE  INCHES WIDE BY 13 INCHES TALL AND 7 3/4 INCHES WIDE. THESE ARE MADE TO BE A UNIVERSAL FIT SO YOU CAN BOLT THEM TO WHATEVER VEHICLE THAT YOU WOULD WANT TO VENT THE HOOD. THESE WILL BE SHIPPED RAW STEEL LIKE YOU SEE HERE. YOU WILL NEED TO CUT YOUR HOOD TO FIT THESE TO YOUR XJ. THESE WILL NEED TO BE PAINTED AND MOUNTED BY THE BUYER. PLEASE SEE MY YOUTUBE CHANNEL DIRTDOGS OFFROAD FOR AN INSTALL VIDEO OF THIS PART AND OTHERS. THANK YOU. THANK YOU FOR LOOKING AND HAPPY OFF-ROADING SHIPPING PRICE IS FOR THE 48 CONTINENTAL UNITED STATES. ALASKA, HAWAII, AND OTHER PLACES OUT OF THE CONTINENTAL US COST MORE TO SHIP BECAUSE UPS CHARGES A SURCHARGE TO GO OFF THE MAINLAND. ----------------------------------------------------------------------------------------------------- PARTS FOR OFF-ROAD PURPOSES ONLY. MOUNTING IS THE RESPONSIBILITY OF BUYER. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------